Supersil^® series columns are upgraded from Hypersil series according to years of experience in technical accumulation and inheritance. The development makes them more outstanding with higher separation efficiency, longer service life and smaller batch difference.

NO.	Item	Specifications	USP code
1	Supersil ODS2	3 µm 120 Å	L1
2	Supersil ODS2	5 µm 120 Å	L1
3	Supersil AQ-C18	5 µm 120 Å	L1
4	Supersil ODS-B	5 µm 120 Å	L1
5	Supersil SiO2	5 µm 120 Å	L3
6	Supersil C8	5 µm 120 Å	L7
7	Supersil NH2	5 µm 120 Å	L8
8	Supersil NH2-S	5 µm 120 Å	L8
9	Supersil SCX	5 µm 120 Å	L9
10	Supersil SCX	5 µm 300 Å	L9
11	Supersil CN	5 µm 120 Å	L10
12	Supersil Phenyl	5 µm 120 Å	L11
13	Supersil C4	5 µm 120 Å	L26
14	Supersil C4	5 µm 300 Å	L26

PT-D2000 HPLC COLUMN OVEN

Temperature: room temp. +5℃ ~100℃

Constant temp. tolerance: ±0.1℃

Temperature repeatability: ±0.1℃

Absolute precision: ±0.1℃ at 50℃

Resolution: 0.1℃

Double-row LED screen to indicate setting temp. and actual temp.

Can install 2 LC column(250mm*4.6mm)

No need software to control

HPLC PT-LC3100

1. High Pressure Constant Flow Pump for Isocratic and Binary gradient 

• Flow rate range: 0.001-10.000 mL/min, in 0.001 mL increments
• Flow accuracy: ≤±0.2% (1.00ml/min, H2O,R.T.,8.5MPa)
• Flow precision: RSD≤0.075% (1.00ml/min, H2O,R.T.,8.5MPa)
• Maximum pressure: 45 MPa
• Pressure accuracy: ≤±3.0%
• Pressure pulsation: ≤0.1 MPa

Low-Pressure Gradient Unit for Quaternary

• Integrated vacuum degasser, 4 channel
• Composition rang: 0-100%
• Composition precision: ≤0.2% RSD
• Composition accuracy: ≤±2.0% 

2. UV detector

• Wavelength range: 190-700 nm
• Wavelength repeatability: ≤0.1 nm
• Wavelength accuracy: ≤±1.0 nm
• Bandwidth: 8nm
• Response time: 0.0 s-5 s
• Baseline noise: ≤±0.5×10-5 AU
• Drift: ≤1.0×10-4 AU/h (empty cell, 254 nm, 60 min)
• Path length: 10 mm(analytical cell)
• Light source: Deuterium Lamp 

3. Refractive Index Detector

• Flow cell type：2 chamber-type
• Measuring method：Deflection type
• Refractive Index range：00 to 1.75
• Measuring range：25 to 512μRIU
• Drift：2μRIU/h (Pure water 1mL/min, PURGE OFF)
• Linearity range：≥600μRIU
• Noise：≤2.5nRIU (Pure water, response : 1.5sec)
• Response：1 , 0.25 , 0.5 , 1 , 1.5 , 2 , 3 , 6 sec
• Cell volume：8μL
• Flow rate：(Usual) 0.2 to 3.0mL/min；(Max.) 10mL/min (solvent: pure water)

4. Evaporative Light Scattering Detector

• Light source: high intensity halogen lamp
• Detector: high sensitivity photomultiplier
• Analogue signal output: 0-1V
• Heating time:<10min heat-up to 150℃
• Temperature range: evaporation chamber max 150℃, increase by 1℃, nebulizer max 70℃
• Gas flow rate: 1-2L/min, recommended pressure 1-2bars
• Noise<1m Volt(1ml/min)
• Nebulizer type: venture tube 

5. Diode Array Detector

• 512 diodes
• Wavelength range: 190-760 nm
• Wavelength repeatability: ±0.1 nm
• Wavelength accuracy: ±1nm
• Baseline noise: ≤±1.0×10-5 AU (empty cell, 254 nm, 1.0 s)
• Drift: ≤2.0×10-4 AU/h (empty cell, 254 nm, 60 min)
• Path length: 10 mm (analytical cell)
• Light source: Deuterium Lamp and Tungsten Lamp 

6. Fluorescence Detector

• Light source: Xenon flash lamp
• Wavelength Range: 0, 200 nm to 650 nm (Dual wavelength simultaneous monitoring possible)
• Spectral Bandwidth: 20 nm
• Wavelength Accuracy: ±2 nm
• Wavelength Reproducibility: ±0.2 nm
• S/N: Water Raman peak S/N 1200 min
• Cell (capacity, pressure resistance, material): 12 µL; 2 MPa (approx. 20 kgf/cm2); SUS316L, PTFE (fluororesin), quartz

7. Autosampler

• Inject volumn range: 0-100 μL (standard)
• Precision: RSD <0.3%
• linearity: >0.999
• Sample residual: <0.01%
• Number of sample plates: Two of 60 position 2-mL vial plates
• Syringe: 500 μL

8. Column oven

• Column capacity: Three columns, up to 10mm internal diameter, up to
• 250mm length with guard column
• Temperature range: room temperature+5.0 to 80℃, settable in 0.1℃ increments
• Temperature accuracy: ≤±0.5℃
• Temperature stability: ≤±0.1℃ 

Optional column oven(cooling function)

• Column capacity: 3 columns up to 300mm length
• Cooling function temperature range: 5 to 80℃
• Normal temperature range: room temperature to 100℃
• Accuracy: 0.1℃
• Displayer: 4-digit LED

9. Workstation

• Internal and external standard calculation methods
• Automatically displays, prints, exports and starts other programs after the completion of a measurement.
• Comply with the requirements of the 21 CFR Part 11 directive of the FDA 

10. On-line degasser

• Maximum number of degassing Channel: 4
• Flow path ID: 1.143mm
• Internal volume: 480μL
• Wetted Materials: PEEK, Teflon® AF

PT-LC1100 Isocratic/binary gradient

High Pressure Constant Flow Pump

•  Double plunger reciprocating pump
•  Flow Range：0.001mL/min-10.000mL/min;
• Setting Step Size：0.001mL/min
•  Flow Accuracy：≤±0.3% (1.00ml/min, H2O,R.T.,8.5MPa)
•  Flow stability：RSD≤0.1% (1.00ml/min, H2O,R.T.,8.5MPa)
•  Maximum Pressure：42MPa
•  Display Pressure Error：≤±3.0%
• Pressure Fluctuation：≤1.0%
•  Power Dissipation：80W
•  External Dimension
• (Length x Width x High)：420mm×260mm×160mm

UV/VIS Detector

• Wavelength Range:190-700nm
• Wavelength Repeatability:±0.1nm
• Wavelength Accuracy:≤±1.0nm
• Spectrum Band Width:8nm
• Response Time：0.0s-4.9s
• Linearity Range:1.8AU (5%)
• Baseline Noise:≤±1×10-5AU
• Baseline Drife:≤2.0×10-4AU/h
• minimum Detectable Concentration:4.0×10-9g/mL (Naphthalene in Methanol Solution)
• Detector Cell：Optical Path–10mm，Volume–10μL
• Light Source：Deuterium Lamp
• Power Dissipation:100W
• External Dimension
• (Length x Width x High)：420mm×260mm×160mm